Pre-delivery inspections of home
Category: Inspection
17 Aug 17
There are some points to inspect or check during Pre-delivery inspections of home which are given below,
- When inspecting ceilings, walls, doors and windows you should check for obvious defects such as gouges, cracks and dents on finished surfaces.
- Make sure doors must be well-fitted and also check Locks should be well installed and not rattle when the door is closed.
- Make sure drywall should have no noticeable seam or evidence of nail pops.
- Check the floors and make sure there are no excessive squeaks or springs.
- Check the subfloor joints should not show ridges around tiles.
- Flush toilets and turn on water taps to check water pressure and temperature.
- Check the caulking and grouting around tiles and tubs for gaps and cracks.
- Check tubs and sinks for any scratches in the finishes.
- Locate the switches for ventilation and circulation fans normally found near the thermostat.
- Check the fans in the bathrooms and kitchen are operating properly.
- Check the brickwork and masonry are free of cracks, and the doors and windows are properly caulked.